Upgrade Onderdelen

Fits:

SURRON LIGHTBEE
SEGWAY X160 & X260 
TALARIA MX3, MX4 & XXX 

   4 bolt downhill MTN bike top triple clamp

Fits:

SURRON LIGHT BEE

• Warp 9’s new and improved V3 linkage in an oem height linkage
• Now greaseable with Zerk fittings
• Includes Low profile Zerk fitting for triangles that might hit traditional Zerk fittings
• Includes traditional Zerk fittings that fit most grease guns.
• Pre lubed with Lucas Red Stick Grease
• Forged 7075T6 aluminum
• Hardened Stainless Steel Bushings
• Revised needle bearings with a thicker needle cage

● V2 Now includes several updates over original version
● 2” Longer wire for those running high bar mounts with taller bars.
● Mounts to the backside of the OEM Brakes, Magura MT7 & MT5 Brakes, Hope V4 & E4 Brakes and Hayes Dominion A4 with 2 bolt clamps.
● Includes back half clamp to be used with non OEM brakes such as TRP, Hope Tech 4 V4 & Shimano Saints etc.
● Includes burnt titanium screws to work with oem brakes or back half clamp
● Includes Burnt Titanium screws to work with Magura brakes ( without back half clamp )
● Plugs into factory wiring harness, No cutting or splicing
● Works with oem headlight or any headlight that plugs into the oem surron harness

Front Sliders

Aluminum nut and backing plate available in anodized colors

Integrated track stand grooves machined into the slider spools

Stainless steel solid rod with stainless nut will nut rust like all thread of lesser designs

Replaceable spools are machined from UHMW-PE for its excellent low drag and high wear compared to Delrin of lesser brands

Rear sliders

Integrated rear axle adjuster blocks make these a clean install and a solid mount for the slider spools

captive style axle blocks makes chain adjustment a breeze, includes a long reach Allen wrench for easy first time install

Blocks are laser etched with chain alignment marks for easy alignment.

Blocks are available in anodized colors

Replaceable Spools are machined from UHMW-PE for its excellent low drag and high wear compared to Delrin of lesser brands and mounted to the blocks with stainless hardware

Fits:

SURRON LIGHTBEE
SEGWAY X160 & X260 

Specifically Designed to fit the OEM light bee peg brackets

lightweight 7075T6 Forged Aluminum

Extra Wide “Y” platform

Platform size is 57mm wide and 87mm long

Permanent Stainless Steel teeth

Uses the OEM Spring and pivot pin

Lifetime Warranty against breaking.

Fits:

SURRON LIGHT BEE

• Warp 9’s new and improved V3 linkage in an oem height linkage
• Now greaseable with Zerk fittings
• Includes Low profile Zerk fitting for triangles that might hit traditional Zerk fittings
• Includes traditional Zerk fittings that fit most grease guns.
• Pre lubed with Lucas Red Stick Grease
• Forged 7075T6 aluminum
• Hardened Stainless Steel Bushings
• Revised needle bearings with a thicker needle cage

• V2 now includes several updates over original version
• 2” longer wire for those running high bar mounts with taller bars.
• Mounts to the backside of the OEM Brakes, Magura MT7 & MT5 Brakes, Hope V4 & E4 Brakes and Hayes Dominion A4 with 2 bolt clamps.
• Includes a back half clamp to be used with non OEM brakes such as TRP, Hope Tech 4 V4 & Shimano Saints etc.
• Includes Burnt Titanium screws to work with Magura brakes ( without back half clamp )
• Plugs into factory wiring harness, No cutting or splicing
• A perfect replacement horn button when you are using an aftermarket speed controller and don’t want to retain the OEM Horn/Eco switch

The ultimate protection for your E-Moto’s braking system!

Expertly CNC-cut from premium 7075-T6 aluminum, this Disk Guard offers unparalleled strength and durability. The choice of 7075-T6 aluminum, known for its excellent mechanical properties and resistance to fatigue, ensures that your disk guard not only withstands the rigors of aggressive riding but also provides lasting protection in the toughest conditions. Designed with precision and care, the Ultra Bee Disk Guard is an essential upgrade for riders seeking to enhance their bike’s resilience and performance. Perfect for both competitive and recreational use, this Disk Guard is a robust safeguard against debris, rocks, and other hazards that you might encounter on the trail or track.

• Perfect Fit: Custom-made for the Surron Ultra Bee
• Easy Maintenance: Bolts with grease zerk fittings for simple lubrication
• Durable Build: CNC cut from high-strength 7075-T6 aluminum
• Compatible: Works with both OEM and Warp 9 Linkage
• Color Choices: Available in 6 vibrant colors

Fits:

SURRON LIGHT BEE

• Warp 9’s new and improved V3 linkage in an oem height linkage
• Now greaseable with Zerk fittings
• Includes Low profile Zerk fitting for triangles that might hit traditional Zerk fittings
• Includes traditional Zerk fittings that fit most grease guns.
• Pre lubed with Lucas Red Stick Grease
• Forged 7075T6 aluminum
• Hardened Stainless Steel Bushings
• Revised needle bearings with a thicker needle cage

• FRONT WHEEL BOOST SPACER, 5MM THICKNESS
• USED ON BUT NO LIMITED TO THESE FORKS. FOX 40, EXT FERRO, MANITOU DORADO.
• INCLUDES QTY 6 M5 X 16MM HIGH GRADE STEEL BOLTS